Glass Transition Temperature and how it dictates the material selection for Composite Repair Systems for pipework in the Oil & Gas industry

July 22, 2024

In the Oil & Gas industry, maintaining the integrity of pipework is of paramount importance. Pipework often faces various challenges, including corrosion, mechanical damage, and structural degradation. Composite repair systems have emerged as a reliable solution for rehabilitating pipework, ensuring longevity and reliability.

ISO 24817 & ASME PCC-2 Part 4, the international standards for composite repairs for pipework, play a crucial role in guiding material selection for these systems. Among the myriad factors influencing material choice, the glass transition temperature (Tg) stands out as a critical parameter. This article explores the significance of Tg in the context of composite repair systems, particularly its impact on material selection for pipework repair in the Oil & Gas industry.    

Table of contents    

           

  1. Understanding Glass Transition Temperature
  2. Importance of Tg in Composite Repairs
  3. Material Selection Criteria according to ISO 24817 & ASME PCC-2 Part 4
  4. Conclusion

Understanding Glass Transition Temperature    

The glass transition temperature is a fundamental property that characterises the transition between the glassy and rubbery states of a material, as shown in the figure below. It is the temperature at which an amorphous polymer transforms from a hard, brittle state to a more flexible, elastic state. In the context of composite repair systems, the amorphous polymer is the composite matrix, typically a thermoset resin system such as an epoxy resin.    

Glass transition temperature explained

The Tg of the chosen material significantly influences its performance under various environmental conditions. The Tg varies widely between different resin systems, the degree to which they are cured and whether the resin system was mixed stoichiometrically. The transition is reversible upon the thermoset resin cooling back down below the Tg.    

Importance of Tg in Composite Repairs    

Thermal Stability    

Oil & Gas pipework operates in diverse environments, from arctic conditions to high-temperatures exceeding 500°C. The Tg of a composite repair material dictates its thermal stability, ensuring that the repaired pipework can withstand the temperature extremes it may encounter during its operational life. Above the Tg the mechanical properties of the composite repair material will change significantly. Properties such as the resin modulus (stiffness) drop sharply, resulting in corresponding drops in the compressive and shear strength of the composite material.    

Above the Tg the change in mechanical properties of the composite material will invalidate the design calculations – the layer count and axial extent of the composite repair will no longer be sufficient to retain the internal pressure of the pipework. Choosing a material with an appropriate Tg ensures that the composite repair system retains its structural integrity across the operating temperature range of the pipework, preventing premature failure.    

Compatibility with Operating Temperatures    

ISO 24817 & ASME PCC-2 outline the importance of selecting materials that are compatible with the operating temperatures of the pipework. The Tg of the composite repair material should be above the maximum operating temperature to prevent dimensional changes or loss of mechanical properties. Conversely, the Tg should not be too high, as this may compromise the material's flexibility and impact resistance. Striking the right balance is crucial for ensuring the longevity and effectiveness of the repair.    

Resistance to Environmental Factors    

Oil & Gas pipework is exposed to various environmental factors, including chemical exposure, UV radiation, and moisture. The Tg of the composite repair material influences its resistance to these factors. For instance, a material with a high Tg is more likely to resist chemical degradation, UV damage and water resistance, making it suitable for applications in harsh environments.    

Material Selection Criteria According to ISO 24817 & ASME PCC-2 Part 4    

ISO 24817 & ASME PCC-2 provides guidelines for the selection of materials for composite repairs in the Oil & Gas industry. The standards emphasise the importance of considering environmental conditions, mechanical properties, and thermal stability. The glass transition temperature is explicitly mentioned as a critical factor in the material selection process and the service temperature limit varies slightly between the two standards.    

Both ISO 24817 & ASME PCC-2 require that the composite repair material should have a Tg higher than the maximum expected operating temperature. This requirement ensures that the material remains in its glassy state at the pipework's operating temperature, preventing softening or deformation.    

ISO 24817:2017    

ISO 24817 Table 6, below, summarises the upper temperature limit of the composite repair system. The service temperature limit is a function of the repair class, defect type and repair design lifetime.    

     

                                                           

   

Please note, HDT stands for the Heat Distortion Temperature. The HDT is the temperature at which a polymer deforms under a specified load. HDT is only used if a repair system does not show a glass transition temperature. The Repair Classes are defined in Table 2 of ISO 24817, below.    

     

                                                           

   

ASME PCC-2 Part 4 : 2022    

The service temperature limit in ASME PCC-2 is purely a function of the defect type -  leaking or non-leaking. Table 2 below shows the Service Temperature Limits as shown by ASME PCC-2.    

     

                                                           

   

Conclusion    

The Tg plays a role in determining the material's stiffness and flexibility, impacting its ability to withstand mechanical stresses. The mechanical properties of the repair material, such as tensile strength, modulus, and impact resistance, are crucial for ensuring the structural integrity of the repaired pipework. The selected material should have mechanical properties comparable to or exceeding those of the original pipework material.    

The glass transition temperature plays a pivotal role in the material selection process for composite repair systems in the Oil & Gas industry, as outlined by ISO 24817 and ASME PCC-2. A thorough understanding of Tg is essential for ensuring the thermal stability, mechanical integrity, and environmental resistance of the chosen repair material. By adhering to ISO standards and considering the Tg alongside other material properties, the Oil & Gas industry can enhance the reliability and longevity of pipeworks through effective composite repairs. As technology advances and new materials emerge, a continual emphasis on Tg will remain crucial in the pursuit of robust and sustainable pipework solutions.